Residential

Previous Image
Next Image

info heading

info content

Residential

  •  

    Everlast II

    Everlast II Panel

    Everlast II™ is manufactured using our Evercure™ process. Evercure™begins with Full Hard Steel and a heavy duty metallic coating. A pre-treatment is added for superior paint adhesion. Epoxy Primer is applied with the Synergy PaintSystem Finish Coat completing the process. To produce a superior finished panel, the Everlast II™ is Heat Formed™ to keep the paint from microscopic cracking. This process greatly reduces the risk of edge and surface corrosion. The cut edges are then coated with our CECI™ (cut-edge corrosion inhibitor) to provide long lasting durability even on the exposed cut-edge. Everlast II™provides the best warranty the industry has to offer. Everlast Weathertight Sidelap Panels are 38” wide and provide 36” of coverage. They interlock for a weather tight seal with a deep anti-siphon groove which protects against leakage.

    Low Life Cycle Cost & Durability

    High-quality, pre-painted metal roofs afford an attractive lifecycle cost in addition to many other advantages. They will not crack, shrink, or erode, making them a long lasting alternative to many conventional roofing materials.

    Choice of Design, Appearance & Color

    A homeowner can achieve the “designer” look with a wide selection of styles and colors. The aesthetically unique roofs will likely have a positive influence on re-sale.

    Installation Over Existing Roofs

    Pre-painted metal can usually be installed over existing roofs. Disposal of old conventional materials can be difficult and costly. The use of pre-painted metal can often solve this problem.

    Water Absorption

    Properly installed pre-painted metal roofs do not absorb water or moisture. Water can damage most other roofing materials by rotting, cracking, or during a freeze-thaw cycle. Pre-painted metal readily sheds snow and ice.

    Harder Paints

    Heat formed™ hard paints provide a durable and quality finish. Other manufacturers form hard paints at room temperature which causes the paint to microscopically crack.

    Energy Efficient

    Fire Resistant

    Wind Resistant

  • Try our color visualizer.

    Please Note:

    These colors are as close as possible to the actual colors. For exact color approval, painted swatches are available.

  • Trim

    Residential Accessories

  • Try our color visualizer.

    Residential Everlast II Product Brochure PDF

    Residential/Light Gauge Install Guide PDF

    Trim and Accessories Guide PDF

    Roof Slope Chart PDF

    Everlast II Traditional Technical Guide PDF

    Galvalume vs. Galvanized Substrates PDF

     

     


  • Commercial & Post Frame

    Previous Image
    Next Image

    info heading

    info content

    Commercial & Post Frame

  •  

    Everlast II

    Everlast II Panel

    Everlast II™ is manufactured using our Evercure™ process. Evercure™begins with Full Hard Steel and a heavy duty metallic coating. A pre-treatment is added for superior paint adhesion. Epoxy Primer is applied with the Synergy PaintSystem Finish Coat completing the process. To produce a superior finished panel, the Everlast II™ is Heat Formed™ to keep the paint from microscopic cracking. This process greatly reduces the risk of edge and surface corrosion. The cut edges are then coated with our CECI™ (cut-edge corrosion inhibitor) to provide long lasting durability even on the exposed cut-edge. Everlast II™provides the best warranty the industry has to offer. Everlast Weathertight Sidelap Panels are 38” wide and provide 36” of coverage. They interlock for a weather tight seal with a deep anti-siphon groove which protects against leakage.

    Low Life Cycle Cost & Durability

    High-quality, pre-painted metal roofs afford an attractive lifecycle cost in addition to many other advantages. They will not crack, shrink, or erode, making them a long lasting alternative to many conventional roofing materials.

    Choice of Design, Appearance & Color

    A homeowner can achieve the “designer” look with a wide selection of styles and colors. The aesthetically unique roofs will likely have a positive influence on re-sale.

    Installation Over Existing Roofs

    Pre-painted metal can usually be installed over existing roofs. Disposal of old conventional materials can be difficult and costly. The use of pre-painted metal can often solve this problem.

    Water Absorption

    Properly installed pre-painted metal roofs do not absorb water or moisture. Water can damage most other roofing materials by rotting, cracking, or during a freeze-thaw cycle. Pre-painted metal readily sheds snow and ice.

    Harder Paints

    Heat formed™ hard paints provide a durable and quality finish. Other manufacturers form hard paints at room temperature which causes the paint to microscopically crack.

    Energy Efficient

    Fire Resistant

    Wind Resistant

  • Try our color visualizer.

    Please Note:

    These colors are as close as possible to the actual colors. For exact color approval, painted swatches are available.

  • Trim

    Everlast-II-Metal-Roofing-Trim-Sheet

  • Try our color visualizer.

    Everlast II Product Brochure PDF

    Omni Product Brochure PDF

    Omni Color Guide PDF

    Residential/Light Gauge Install Guide PDF

    Trim and Accessories Guide PDF

    Roof Slope Chart PDF

    Everlast II Traditional Technical Guide PDF

    Galvalume vs. Galvanized Substrates PDF


  • Equestrian & Agricultural

    Previous Image
    Next Image

    info heading

    info content

    Equestrian & Agricultural

  • Everlast II

    Everlast II Panel

    Everlast Roofing, Inc. has created a panel just for the light gauge market. The Omni Series is roll-formed in the Everlast II profile. Everlast II is 38” wide and provides 36” of coverage. ribs are 9” apart and approximately 3/4” high with ribs in between that are a full 3/16” high. A stiffener is added to all the major ribs, which along with the thickness of the steel, makes this panel extremely strong. This not only adds considerable durability to your building.

    Superior Paint System

    Available in 15 Synergy Paint Colors, Everlast has the highest performance resin in the industry employing the best quality, siliconized polyester paint system. This system is enhanced by the metal coating in the industry. The Synergy Paint system is more flexible and therefore better able to withstand the forming process. This results in outstanding barrier protection.

    Heat Forming

    Cracks allow moisture, which is often contaminated by atmospheric pollutants, to penetrate the protective surface of the coating, and cause the substrate to corrode. In fact, the fractures in the paint can cause a painted panel to corrode at a faster rate than an unpainted panel. At the point where the painted film has been opened, electrochemical cells are established which will promote greater and faster corrosive attack.

    CECI

    The Omni Series is protected with Everlast’s CECI (Cut-Edge Corrosion Inhibitor). CECI effectively decreases the corrosion rate of the factory cut edge. This application is applied to the factory cut edge of all Everlast II’s Omni Panels. Because the corrosion inhibitor applied is a clear product, end users will see virtually no sign of CECI as it quietly protects and effectively decrease corrosion rates, as proven through industry research.

    Warranty

    The Omni Series is formulated to deliver ultimate performance. Everlast Roofing, Inc. is confident that the Omni Series will provide you the most corrosive resistant panel in light gauge market. We are backing that performance with a limited lifetime warranty. This warranty will provide you the comfort of knowing that your building is built to last.

  • Try our color visualizer.

    Please Note:

    These colors are as close as possible to the actual colors. For exact color approval, painted swatches are available.

  • Trim

    Everlast-II-Metal-Roofing-Trim-Sheet

  • Try our color visualizer.

    Everlast II Product Brochure PDF

    Omni Product Brochure PDF

    Omni Color Guide PDF

    Residential/Light Gauge Install Guide PDF

    Trim and Accessories Guide PDF

    Roof Slope Chart PDF

    Everlast II Traditional Technical Guide PDF

    Galvalume vs. Galvanized Substrates PDF


  • Standing Seam

    Previous Image
    Next Image

    info heading

    info content

    Standing Seam

  • droppedImage_1

    The standing seam panel has the elegant look of a traditional style standing seam roof, with the strength and durability of high strength 24-gauge steel manufactured in the USA. Standing seam is 19.5” wide with a 1 1/2” high seam. The integral locking seam is held in place by concealed metal clips, and is installed over a waterproof solid substrate. The absence of exposed fasteners and the weather-tight side lap, allow for applications on roof pitches as low as a 3:12.

     Low Life Cycle Cost & Durability

    High-quality, pre-painted metal roofs afford an attractive life cycle cost in addition to many other advantages.They will not crack, shrink, or erode, making them a long lasting alternative to many conventional roofing materials.

    Energy Efficient

    Consider the radiant heat reflectance of light colored metal in warm climates, resulting in cooling cost savings. Also, pre-painted metal readily sheds snow and ice! This is a distinct advantage in high snow areas.

     Fire Resistance

    Consider the fact that metal doesn’t burn! Non-combustibility should offer protection from external hazards such as windblown sparks or lightning when properly grounded.

    Wind resistance

    Properly installed pre-painted metal roofs should not need periodic repair or replacement due to wind damage or storms. Properly installed pre-painted metal roofs do not absorb water or moisture.  With your pre-painted metal roof you can rest easy with the knowledge that your home and investment is protected.

  • Try our color visualizer.

    Please Note:

    These colors are as close as possible to the actual colors. For exact color approval, painted swatches are available.

  •  

  • Try our color visualizer.

    Standing Seam Product Brochure PDF

    Everseam 19.5 Install Guide PDF

    Everseam Color Guide PDF

    Roof Slope Chart PDF

    Galvalume vs. Galvanized Substrates PDF