Standing Seam Panel

droppedImage_1

The standing seam panel has the elegant look of a traditional style standing seam roof, with the strength and durability of high strength 24-gauge steel manufactured in the USA. Standing seam is 19.5” wide with a 1 1/2” high seam. The integral locking seam is held in place by concealed metal clips, and is installed over a waterproof solid substrate. The absence of exposed fasteners and the weather-tight side lap, allow for applications on roof pitches as low as a 3:12.

 Low Life Cycle Cost & Durability

High-quality, pre-painted metal roofs afford an attractive life cycle cost in addition to many other advantages.They will not crack, shrink, or erode, making them a long lasting alternative to many conventional roofing materials.

Energy Efficient

Consider the radiant heat reflectance of light colored metal in warm climates, resulting in cooling cost savings. Also, pre-painted metal readily sheds snow and ice! This is a distinct advantage in high snow areas.

 Fire Resistance

Consider the fact that metal doesn’t burn! Non-combustibility should offer protection from external hazards such as windblown sparks or lightning when properly grounded.

Wind resistance

Properly installed pre-painted metal roofs should not need periodic repair or replacement due to wind damage or storms. Properly installed pre-painted metal roofs do not absorb water or moisture.  With your pre-painted metal roof you can rest easy with the knowledge that your home and investment is protected.

Colors

Try our color visualizer.

Please Note:

These colors are as close as possible to the actual colors. For exact color approval, painted swatches are available.

Accessories

 

Project Gallery

Resources

Try our color visualizer.

Standing Seam Product Brochure PDF

Everseam 19.5 Install Guide PDF

Everseam Color Guide PDF

Roof Slope Chart PDF

Galvalume vs. Galvanized Substrates PDF

 

 

Everlast II Panel

 

Everlast II

Everlast II Panel

Everlast II™ is manufactured using our Evercure™ process. Evercure™begins with Full Hard Steel and a heavy duty metallic coating. A pre-treatment is added for superior paint adhesion. Epoxy Primer is applied with the Synergy PaintSystem Finish Coat completing the process. To produce a superior finished panel, the Everlast II™ is Heat Formed™ to keep the paint from microscopic cracking. This process greatly reduces the risk of edge and surface corrosion. The cut edges are then coated with our CECI™ (cut-edge corrosion inhibitor) to provide long lasting durability even on the exposed cut-edge. Everlast II™provides the best warranty the industry has to offer. Everlast Weathertight Sidelap Panels are 38” wide and provide 36” of coverage. They interlock for a weather tight seal with a deep anti-siphon groove which protects against leakage.

Low Life Cycle Cost & Durability

High-quality, pre-painted metal roofs afford an attractive lifecycle cost in addition to many other advantages. They will not crack, shrink, or erode, making them a long lasting alternative to many conventional roofing materials.

Choice of Design, Appearance & Color

A homeowner can achieve the “designer” look with a wide selection of styles and colors. The aesthetically unique roofs will likely have a positive influence on re-sale.

Installation Over Existing Roofs

Pre-painted metal can usually be installed over existing roofs. Disposal of old conventional materials can be difficult and costly. The use of pre-painted metal can often solve this problem.

Water Absorption

Properly installed pre-painted metal roofs do not absorb water or moisture. Water can damage most other roofing materials by rotting, cracking, or during a freeze-thaw cycle. Pre-painted metal readily sheds snow and ice.

Harder Paints

Heat formed™ hard paints provide a durable and quality finish. Other manufacturers form hard paints at room temperature which causes the paint to microscopically crack.

Energy Efficient

Fire Resistant

Wind Resistant

Resources

Try our color visualizer.

Everlast II Product Brochure PDF

Omni Product Brochure PDF

Omni Color Guide PDF

Residential/Light Gauge Install Guide PDF

Trim and Accessories Guide PDF

Roof Slope Chart PDF

Everlast II Traditional Technical Guide PDF

Galvalume vs. Galvanized Substrates PDF

Project Gallery

Accessories

Trim

Everlast-II-Metal-Roofing-Trim-Sheet

Colors

Try our color visualizer.

Please Note:

These colors are as close as possible to the actual colors. For exact color approval, painted swatches are available.